Biotite


Biotite in Cheviot igneous rocks


Biotite, a variety of mica, is common in most Cheviot igneous rocks. Whilst most of it is a primary mineral that crystallised out of the original melt, some of it is secondary, having been formed by the hydrothermal alteration of other primary minerals due to the circulation of hot fluids. It appears sometimes in fairly well-formed thin, platy crystals and sometimes as ragged flakes with dimensions that range from less than 0.1 mm up to 3.0 mm in phenocrysts. When visible, cleavage lines are usually straight and parallel but very occasionally in Cheviot biotite, they can appear wavy or kinked.
All Cheviot biotite is pleochroic, usually changing from a straw yellow to a dark reddish brown colour as the mineral is rotated under the microscope in plane polarised light. Deeper brown colouration may be associated with higher titanium content.
Primary biotite crystals commonly contain many inclusions of magnetite along with accessory minerals like apatite and zircon. Since secondary biotite is generally free from inclusions of minerals other than magnetite, this feature helps to distinguish between the two.

Biotite in a fine-grained porphyritic granite viewed with crossed polars. Locality: S. Long Crag, Cheviot Hills, Northumberland.
The inclusions of apatite and zircon in this biotite crystal suggests it is a primary mineral that crystallised out of the original melt.

Al-Hadfh analysed eleven grains of primary biotite and one grain of secondary biotite using electron microprobe. The primary biotites came from five samples that represented rock from marginal, porphyritic and evolved granite types.
He identified the biotite as uniformly aluminium-poor magnesio-annites on the boundary separating the annite type from the phlogopite type of biotite. However, his data seems to place most samples on the phlogopite side of the boundary.
Al-Hafdh saw a correspondence between these unusually high proportions of magnesium and those in the Cheviot orthopyroxene and clinopyroxene. He suggested they reflect a stage of iron depletion earlier in the magmatic history of the rocks perhaps resulting from the precipitation of magnetite.
The analysis also revealed that, except for one grain of biotite from the marginal variety of rock, the titanium content of the primary biotite was unusually high.The Ti02 content ranged from 4.7% to 6.4%, “reaching higher levels than the highest recorded in Deer, Howie and Zussman (1962) for granites or granodiorites, and higher than the highest value analysed from the Ben Nevis granite complex (4.65%).”
The grain of primary biotite from the Marginal rock was much lower in titanium and richer in iron than the other samples possibly reflecting, in Al-Hafdh’s view, the occurrence of local extreme crystal fractionation in the magma.

H.W. Haslam analysed two grains of biotite from two separate rock samples; one from the summit of Dunmoor Hill, one from a location just north of Great Standrop. He too found remarkably high levels of titanium in both samples together with very low total aluminium and silicon levels. Haslam understood the low Al and Si levels to represent Cheviot granite crystallisation occurring in conditions more oxidising than is the case for most granites. He also noted that the low level of these two elements in biotite is characteristic of biotites that co-exist with pyroxenes.

Composition Diagram for Cheviot Biotites

Identification

Biotite has one perfect cleavage and high birefringence although its second and third order colours are masked by its often strong reddish or greenish brown absorption colour. Its absorption colour readily distinguishes it from ‘white,’ muscovite mica – as does its pleochroism. Biotite can be mistaken for hornblende since they can both be brown, pleochroic and exhibit straight parallel cleavage. If the basal section of the hornblende is visible, then its two cleavages may visibly intersect to produce lozenge shapes.Similarly if the basal section of the biotite is visible this will be without any cleavage. Another distinguishing feature of biotite is the ‘bird’s eye’ texture that appears when it is close to extinction, hornblende does not do this.
Phlogopite has a copper-like absorbtion colour.

Photomicrographs of Cheviot Biotite

Biotite in a course-grained porphyritic granite viewed in plane polarised light. Locality: Hedgehope Hill, Cheviot Hills, Northumberland.
The biotite crystal in the centre of view is 1.6mm in length and is positioned so that it is at 90o to the vibration direction of the polarised light, In this position, the absorption colour of the biotite is at its weakest.
Biotite in a course-grained porphyritic granite viewed in plane polarised light. Locality: Hedgehope Hill, Cheviot Hills, Northumberland.
Here, the same biotite crystal has been rotated so that it is at 45o to the vibration direction of transmitted polarised light. In this position its absorption colour is weaker.
Biotite in a course-grained porphyritic granite viewed in plane polarised light. Locality: Hedgehope Hill, Cheviot Hills, Northumberland.
Here, with its cleavage parallel to the vibration direction of the polarised light, the biotite reveals its strongest absorption colour.
Biotite in a course-grained porphyritic granite viewed withcrossed polars.
Locality: Hedgehope Hill, Cheviot Hills, Northumberland.
With crossed polarising filters and with crystal at about 45o the biotite shows high order interference colours altered by its strong absorption colour.
Biotite in a very fine-grained andesitic rock in contact with marginal granitic rock. Sample viewed with crossed polarising filters.
Locality: High Cantle above Low Bleakhope, Cheviot Hills, Northumberland.

This biotite crystal exhibits ‘kink banding’, a characteristic that can be produced by strong tectonic deformation.

Return to list of minerals in Cheviot rocks




No vestige of a beginning, – no prospect of an end